Tagging with the Network Feature

Document created by Spencer Brown Employee on Oct 18, 2019Last modified by Spencer Brown Employee on Oct 30, 2019
Version 2Show Document
  • View in full screen mode

This document outlines the process to create tags for specific networks configured within Qualys.  The Network Feature is solely to avoid issues with overlapping network space and should not be used for purely organizational purposes.

 

  1. Validate Network Feature is enabled
    1. You will see a blue "Networks" tab within Vulnerability Management -> Assets
  2. Capture Network UUID
    1. Navigate to any system generated Asset Group tag for the network you wish to tag
    2. Edit system generated Asset Group tag and view "Tag Rule"
    3. Copy and paste Network UUID
  3. Create new tag
    1. Rule Engine: “IP Address In Range(s) + Network(s)”
    2. Syntax: <RANGES><RANGE network="REPLACE WITH YOUR NETWORK UUID" type="IP">172.16.2.0-172.16.2.255</RANGE></RANGES>

 

 

Note: the Network Feature must be enabled on your subscription.  More about this: Notes on the Networks Feature 

4 people found this helpful

Attachments

    Outcomes